Dji Phantom 3 Standard Easy to Fly
Aircraft
| Weight (Battery & Propellers Included) | 1216 g |
|---|---|
| Diagonal Size (Propellers Excluded) | 350 mm |
| Max Ascent Speed | 5 m/s |
| Max Descent Speed | 3 m/s |
| Max Speed | 16 m/s (ATTI mode) |
| Max Tilt Angle | 35° |
| Max Angular Speed | 150°/s |
| Max Service Ceiling Above Sea Level | 19685 feet (6000 m) |
| Max Flight Time | Approx. 25 minutes |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Satellite Positioning Systems | GPS |
| Hover Accuracy Range | Vertical: ±0.5 m Horizontal: ±1.5 m |
Camera
| Sensor | 1/2.3" CMOS Effective pixels:12 M |
|---|---|
| Lens | FOV 94° 20 mm (35 mm format equivalent) f/2.8 |
| ISO Range |
|
| Electronic Shutter Speed | 8 - 1/8000 s |
| Image Size | 4000×3000 |
| Still Photography Modes |
|
| Video Recording Modes |
|
| Max Video Bitrate | 40 Mbps |
| Supported File Systems | FAT32 (≤32 GB); exFAT (>32 GB) |
| Photo | JPEG, DNG (RAW) |
| Video | MP4, MOV (MPEG-4 AVC/H.264) |
| Supported SD Cards | Micro SD Card 8 GB included |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
Charger
| Voltage | 17.4 V |
|---|---|
| Rated Power | 57 W |
App / Live View
| Mobile App | DJI GO |
|---|---|
| Live View Working Frequency | 2.4 GHz ISM |
| Live View Quality | 720P @ 30fps |
| Latency | Low Latency Video (depending on conditions and mobile device) |
| Required Operating Systems |
|
| Recommended Devices |
*Support for additional Android devices available as testing and development continues. |
Gimbal
| Stabilization | 3-axis (pitch, roll, yaw) |
|---|---|
| Controllable Range | Pitch: -90° to +30° |
| Max Controllable Angular Speed | Pitch: 90°/s |
| Angular Vibration Range | ±0.02° |
Remote Controller
| Operating Frequency | 5.725 - 5.825 GHz, 922.7 - 927.7 MHz (Japan) |
|---|---|
| Max Transmission Distance | FCC: 1000 m CE: 500 m (outdoors and unobstructed, aircraft's altitude at 400 feet (120 m)) |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Battery | 2600 mAh LiPo 18650 |
| Transmitter Power (EIRP) |
|
| Operating Current/Voltage | 600 mA@3.7V |
| Mobile Device Holder | Tablets and smart phones |
| Charging Port | Micro USB |
Intelligent Flight Battery
| Capacity | 4480 mAh |
|---|---|
| Voltage | 15.2 V |
| Battery Type | LiPo 4S |
| Energy | 68 Wh |
| Net Weight | 365 g |
| Charging Temperature Range | 41° to 104°F (5° to 40°C) |
| Max Charging Power | 100 W |
DJI - Introducing the Phantom 3 Standard
2015-08-05
Phantom 3 Standard Tutorial: Unboxing
2015-08-28
Phantom 3 Standard Tutorial: A Closer Look
2015-08-28
Phantom 3 Standard Tutorial: Preparing for Flight
2015-08-28
Introducing the all-new DJI GO mobile app
2015-08-18
Phantom 3 Standard Tutorial: Checking the Electronics
2015-08-28
Phantom 3 Standard Tutorial: IMU Calibration
2015-08-28
Phantom 3 Standard Tutorial: Installing the Propellers
2015-08-28
Phantom 3 Standard Tutorial: Calibrating the Compass
2015-08-28
DJI GO – Intelligent Flight Mode: Follow Me
2015-09-08
DJI GO – Intelligent Flight Mode: Point of Interest
2015-09-08
DJI GO – Intelligent Flight Mode: Waypoints
2015-09-08
DJI GO – Intelligent Flight Mode: Course Lock and Home Lock
2015-09-08
DJI Tutorial: How to edit and share videos using the DJI GO app
2015-08-18
FIRMWARE
-
Phantom 3 Standard Firmware v01.09.0200
2017-06-29
APP / LIVE VIEW
iOS Version v3.1.62.
Requires iOS 8.0 or later. Compatible with iPhone 5s, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus,iPod touch 6,iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 7, iPhone 7 Plus.
Android Version v3.1.59.
Requires Android 4.4 or later.Compatible with LG V20, VIVO X9, OPPO R11, Google Pixel, Nexus 6P, Huawei P9, Huawei MATE 9, Samsung Galaxy Tab S2, Samsung Galaxy S5, Samsung Galaxy S6 Edge, Samsung Galaxy S6, Samsung Galaxy S7, Samsung Galaxy S7 Edge, Samsung Galaxy S8, Samsung Galaxy S8+, Samsung Galaxy Note 8, Samsung Galaxy Note 5, MI 6, MI5.
*Support for additional Android devices available as testing and development continues.
Documents & Manuals
-
How to Update the Firmware v1.4
2017-04-13
-
Phantom 3 Standard Release Notes
2017-06-23
-
Phantom 3 Standard User Manual (EN) v1.4
2017-06-23
-
Phantom 3 Standard User Manual (ES) v1.0
2016-02-05
-
Phantom 3 Standard Quick Start Guide (EN) v1.0
2016-04-19
-
Phantom 3 Standard Quick Start Guide (IT) v1.0
2015-11-26
-
Phantom 3 Standard In the Box
2015-08-05
-
Phantom 3 Intelligent Flight Battery Safety Guidelines v1.0 (EN)
2015-12-01
-
Charging Hub for Phantom 3 Intelligent Flight Batteries v1.0
2015-09-01
-
Phantom 3 Prop Guards Installation Guide
2015-12-17
-
Phantom 3 Safety Guidelines and Disclaimer v1.4
2017-03-31
-
Car Charger for Phantom 3 User Manual
2016-06-17
-
Phantom 3 Intelligent Flight Battery Heater User Manual
2016-06-17
- * Disclaimer of Warranties:SZ DJI Technology Co. Ltd. provides the firmware "as is" and "as available" for your use, without warranty of any kind, either express or implied, including all implied warranties of merchantability, and fitness for a particular purpose. You expressly agree that your use of, or inability to use the firmware is at your sole risk. In no case shall SZ DJI Technology Co. Ltd. be liable for any direct, indirect, punitive, special, or consequential damages arising from your use of any of the firmware, including but not limited to, any loss or damage of any kind incurred as a result of your misuse, transmitted, etc.
- FAQ
- 1.How is the Phantom 3 Standard different from the Phantom 3 Professional/Advanced?
The Phantom 3 Standard is the most streamlined addition to the Phantom 3 series. It connects to the DJI GO app over WiFi and has a 2.7K video camera. The Phantom 3 Professional and Advanced add DJI's Vision Positioning system, GLONASS in addition to standard GPS, an extended range via DJI Lightbridge, and a remote controller with extended functionality. The Phantom 3 Professional also has a 4K camera. All models use the DJI GO app and the DJI Intelligent Flight Battery and take 12 megapixel photos. Compare the Phantom 3 Series>
- 2.How is the Phantom 3 Standard different from the Phantom 2 Vision or Vision+?
The Phantom 3 Standard is a significant upgrade over the Phantom 2 Vision and Vision+ with an enhanced camera, fully integrated remote, compatibility with the DJI GO app, updated flight controller, live HD view, and increased flight range.
- 3.Where can I get the DJI GO app?
The DJI GO app is free to download from the Apple App Store and Google Play. Search for "DJI GO" and download/install the app as usual.
- 4.How do I connect to the DJI GO app?
The Phantom 3 Standard connects to the DJI GO app on your mobile device via its own WiFi network. First power on your remote controller and Phantom 3 Standard. Then connect your mobile device to the dedicated "PHANTOM 3_XXXXX" WiFi network, and open the DJI GO app. Details can be found in the user manual.
- 5.What do the switches on the top of the remote controller do?
These switches are called the S1 and S2 switches.
The S1 switch allows you to change between advanced flight modes, including P-Mode, A-Mode, and F-Mode. More information about these modes can be found in the user manual. Beginners should keep this switch in the uppermost position (P-Mode) when flying.
The S2 switch can be used to trigger Return to Home. When flying, simply toggle this switch up and down several times to tell your Phantom 3 Standard to return to the Home Point and land. - 6.Can I remove the camera and attach my own?
No. The camera that comes with the Phantom 3 Standard is permanently attached. Attempting to remove, replace, or modify the camera may damage the product and will void your warranty.
- 7.What is the range on my Phantom 3 Standard?
The signal transmission distance will vary depending on environmental conditions and local regulations, but the Phantom 3 Standard can reach distances of up to 0.5 miles (1 kilometer) away from the pilot.
- 8.What app should I use with my Phantom 3 Standard?
The Phantom 3 Standard is compatible with the DJI Go app for iOS and Android*, which is also used for other DJI products. The app will detect which aircraft is connected and automatically adjust accordingly.
*Android version coming soon. - 9.Which mobile devices are compatible with the app?
The DJI GO app is only compatible with devices running iOS 8.0 or later or Android v4.1.2 or later. A full list of suggested deceives can be found on the Phantom 3 Standard webpage at DJI.com.
- 10.How do I use the Director automatic video editor?
Director is an automatic video editor built into the DJI GO app. After recording several video clips, simply tap "Library" from the app's home screen. You can then select your clips and a template, which are automatically combined to create a short film that can be shared immediately.
- 11.How do I change the control mode of my Phantom 3 Standard?
By default, the remote controller is set to Mode 2. This means that the right control stick controls the movement of the aircraft and the left control stick controls the throttle and orientation of the aircraft. These controls can be changed to Mode 1 or set to a customized configuration in the DJI GO app. This is only recommended for advanced users.
- 12.Can I use a Phantom 2 Intelligent Flight Battery with the Phantom 3 Standard?
No. The Phantom 3 series uses a newly designed Intelligent Flight Battery with greater power. The Phantom 3 has a 4 cell battery with a capacity of 4480 mAh and a voltage of 15.2 V.
- 13.Can I use a Phantom 3 Professional/Advanced Intelligent Flight Battery with the Phantom 3 Standard?
Yes, the Phantom 3 series batteries are the same.
- 14.My Phantom 3 Standard does not turn off right away, is something wrong?
This is normal. After you attempt to power off the Intelligent Flight Battery, it may remain on for a few seconds as any video data is saved to the Micro SD card. This helps prevent your data from being lost or corrupted.
- 15.Do I have to buy the remote controller separately?
No, there is no need to buy a separate remote controller. Your Phantom 3 Standard comes with a custom-built remote controller that is already linked to the aircraft.
- 16.Does my Phantom 3 Standard support dual Remote Controllers?
No. The included Remote Controller can be used to control both the aircraft and the gimbal tilt at the same time.
- 17.What is the Phantom 3 Standard's maximum flight time?
Flight time will vary depending on environmental conditions and usage patterns, but the Intelligent Flight Battery is designed to provide up to 25 minutes of uninterrupted flight time when fully charged.
- 18.How can I restore a video file if the power is turned off during recording?
Do not remove the Micro SD card from the camera. If it has been removed, place it back in the camera. Turn on the Phantom 3 Standard and wait approximately 30 seconds as the video file is restored.
- 19.How can I ensure that my pictures and videos will be synchronized to my iOS album?
You may need to adjust the settings of your mobile device. Open the Settings menu, select the Privacy tab, select the Photos tab, and then toggle the switch next to the DJI GO app icon. If the GO app has not been granted access to your albums, the photos and videos cannot be synchronized.
- 20.What should I do to land my Phantom 3 smoothly as possible?
Hover the aircraft over a flat, level surface. Slowly pull the throttle stick down until the aircraft touches the ground.
- 21.Why is the number of discharges for the Intelligent Flight Battery not zero, even though I have never used it?
Every Intelligent Flight Battery is tested prior to being packaged and shipped. This affects the discharge time of a new battery and is the reason that the discharge time displayed in the GO app is not zero. The battery is safe to use.
- 22.How can I safely operate the aircraft when encountering compass error?
A compass error may occur when the aircraft is flying close to strong electric magnetic sources (e.g. power transmission lines). The Aircraft Status Indicators will blink red and yellow rapidly when a compass error occurs and the DJI GO app will display one of the following messages:
- Compass error, calibration required
This warning message indicates the aircraft is receiving abnormal compass readings. It is recommended that you power off the aircraft and re-calibrate the compass at a different location and then resume the flight.
- Compass error, exit P-GPS Mode
This warning message indicates that the aircraft is drifting severely. Bring the aircraft to a higher altitude to acquire connections with enough GPS satellites when this warning message appears. The flight controller will automatically adjust the orientation of the aircraft in the midair to mitigate the drifts. The aircraft will switch back to P-GPS mode when the automatic adjustment is completed.
Source: https://www.dji.com/phantom-3-standard
0 Response to "Dji Phantom 3 Standard Easy to Fly"
إرسال تعليق